1). Main Panel
• Support Sensors Q’ty: 99pcs sensors ,Total 99 wireless defence Zones, built-in back up battery inside of panel.
• Working Ways: Landline or VOIP line if you have broadband internet available.
• Output:DC12V 2A
2). PIR Passive Infrared Motion Sensors,
• Installation Mode :Wall mounted by bracket
• Operating voltage: 6VDC
• The system comes with NEW Generation motion sensor.
• Transmitting Freq.: 433.92MHz PT2262 or EV1527 Learning code
• Detection Range: Vertical angle 60degree, Horizontal angle 110 degree, 12m at 20 C.
• Transmitting Distance: minimum 80m( in the open area),Indoor:8~15M
• Detecting Distance:5-8M
• Installation Height: 1.8~2.2m
• Installation Angel: 60~110
3). Door/Window Contact Sensors
• Designed to detect a window or door being opened.
• Can be Attaches to any door or window
• Encoding Type:PT2262 or EV1527 Learning Code,433MHz
• Installation:less than 10mm between 2 parts.
4). 4-buttons Key-Fob Remote Controls
• Turn off the alarm before you even enter the house
• Works at a range of around 50feet
• Built-in one 23A battery
5). Loud Alarm Wired indoor Siren (Black)
• Compatible with all of Vinker alarm system
• SPL: 110dB (1m).
Pre-programmed – as a Door Chime
Optional – Emergency button
– 1 x Main Alarm Panel
– 1 x Door/Window Contact Sensor
– 1 x NEW Generation Motion Sensor
– 2 x Remote Controls
– 1 x Panic Button
– 1 x 110dB Loud indoor Siren
– 1 x AC Adapter (for main panel)
– Built-in battery for All components
- Total 99 Wireless defence Zones, LCD Displayindicator(Time Display) on the Main control unit
- Using phone to operate the alarm system, Human and pet intelligent identification software technology,it can prevent theft.
- Wireless remote control to activate / deactivate through phone system; The phone Auto-dialer function the reporting system can program a maximum of six (6) phone numbers and it can be a fixed line phone.
- Telephone line cut off alarm function option; Build in NI-HI rechargeable battery is available to provide power supply after power outage.
- The Door/Window Magnetic Contact Sensor detects an angle of tilt as the door opens and send a alarm to scare the intruder,notify you of intrusion,Protecting your shop, office, home or any entrance inside a house requiring protection. It is quite convenient and easy to use, affix the main unit of entry alarm at the side of the door or window, can be easily mounted to windows or doors, no tools required!